Technical Information
90
CVA615 Coffee System
Figure 5-49: Test Jumper Position
4. Release all three coffee buttons.
5. Remove the jumper and reconnect JP25
6. Press and hold all three coffee buttons. Observe the number
displayed in the bottom right of the display (see figure 5-50).
5678
34
Figure 5-50: Display while in Service Mode
Is the displayed value 30 or higher?
NO YES
Normal Operation
Ensure
…
Sufficient water is present
The water path is clear
Water lines are not crimped
Heaters, flowmeter etc…freely pass water
Water valves fully open
Water line connections are tight & do not leak
To Next Page
Loading...
