Miele H350 - 5.3 Oven Removal; 5.4 Front Cover Removal; 5.5 Fascia Panel Removal

Novotronic Models
Technical Information
35
5.3 Oven – Removal
Note It is advisable to remove any drawer or front panel that may
be fitted below the appliance to avoid the risk of damage
1
Figure 5-8: Removing the Mounting Screws
1. Perform door removal procedure
2. Remove the screws from the deflector strips
3. Slide the appliance from it’s housing
5.4 Front Cover - Removal
1. Perform door removal procedure
2. Perform oven removal
3. Remove screws from the front cover, remove cover
5.5 Fascia Panel - Removal
1. Perform door removal procedure
2. Remove the ovens mounting screws
3. Remove the knobs (if applicable) with a lid opener
4. Remove the fascia panel mounting screws
5. Pull the fascia panel forward and remove it upwards