Novotronic Models
Technical Information
55
6.0 Fault Diagnosis
6.1 Service Modes
Initial requirements
Turn the selector switch to “O”
Accessing
1. Open the door fully
2. Turn the selector switch to Defrost
3. For H350 models Press the “Cook” button 3 times within 2 seconds
4. For H373/H387 Models press the “Timer” button 3 times within 2
seconds
Acknowledgement indicator
The display shows --00
Procedures
1. Wait approximately 10 seconds
2. Press the – or + buttons as appropriate to the desired service mode
position in accordance with table 6-1 and 6-2
Note
The service mode will be cancelled automatically after it has operated for
5 minutes or if a power loss occurs for more then 1 second
Continued on next page.
To Next Page
Loading...