Novotronic Models
Technical Information
94
6.4.3 Locking Function - On
After the operating mode and temperature have been selected and the
control lamps of the “-“ and “+” buttons have switched off, the set
operating mode can no longer be altered and the set temperature can
only be reduced. Changes to the desired operating mode, temperature
and possible cooking time programming can then only be made after the
selector switch has been turned to "0".
Initial Requirements
Turn the selector switch to "0"
Accessing
1. Open the door fully
2. Turn the selector switch to "Light"
3. Press the “Temp” button
Acknowledgement Indicator
The display shows 01:0 or the most recently modified programmable
function
Options
1. Press the “-“or “+” buttons as appropriate to advance to
programmable function 01
2. Press the “Cook” or “Timer” button depending on the model to select
option 0
3. The display shows 01:0
Save and Quit
Turn the selector switch to "0"
To Next Page
Loading...