Miele H350 - 5.6 Control Module Removal; 5.7 Control and Power Module Removal

Novotronic Models
Technical Information
36
Figure 5-9: Removing the Fascia Panel
5.6 Control Module - Removal
1. Perform door removal procedure
2. Perform oven removal
3. Perform front cover removal
4. Perform fascia panel removal
6. Press the retaining lugs down and remove the control module
7. Disconnect the connection for the control module from the electronic
unit
5.7 Control and Power Module - Removal
1. Perform door removal procedure
2. Perform oven removal
3. Perform front cover removal
4. Remove the electronic mounting screw
5. Unclip the electrical connections and remove