Miele H350 - 6.2 Fault Codes; 6.2.1 Fault Code F3; 6.2.2 Fault Code F4

Novotronic Models
Technical Information
57
28 e.g. 0045 Operating hours for
Convection Heating
29 e.g. 0009 Operating hours for Grill 1
and Grill 2
30 FREI Vacant
31 --31 Model, regulator
programming and
frequency programming
32 e.g. P 01 Regulator parameter
display
33 e.g. 60 F Power Frequency
(Set to 60 Hz on all US
Models)
Table 6-2: Service Mode Positions (Continued from Table 6-1)
Save and quit service mode
Press and hold the “Cook” or “Timer” button (depending on your
model) for more then 3 seconds
6.2 Fault Codes
Access the fault codes by entering service mode and proceed to step 25
as per table 6
6.2.1 Fault Code F3
Cause
Roast probe short-circuited
Remedy
Replace the Roast probe
6.2.2 Fault Code F4
Cause
Oven PTC temperature sensor open-circuited
Remedy
Replace the PTC sensor