Miller Axcess E 300 - Connection Diagram; Upper Front Panel Receptacles

OM-244 814 Page 28
245 739-A
1 Welding Power Source
2 Wire Feeder
3 Gas Cylinder
4 Gas Hose
5 Network Feeder Cable
6 Negative (−) Weld Cable
7 Workpiece
8 Voltage Sensing Lead
Recommended for Accu-pulse and
required for RMD.
. Positive (+) voltage sensing
lead is contained in the motor
cable.
9 Positive (+) Weld Cable
8-3. Connection Diagram
1
2
3
4
5
7
8
9
6
245 746-A
1 USB Host Receptacle A
2 USB Device Receptacle B
USB receptacles provide connections
for various USB host devices.
8-4. Upper Front Panel Receptacles
1
2