Mahr GmbH, Millimar C1208/C1216/1240
OPTORSS interface protocol
Only the current measured values can be que-
ried.
Requesting the current measured value
PC : ?<CR>
Mil : xxx.xxx<Einheit><CR><LF>,
The data format matches that
of the numerical measured val-
ue display.
No data is sent when the cata-
log of functions and parameters
is open or during master mea-
surement.
MARTALK interface protocol
This protocol type is used by the
D 1000 S configuration program.
Further details can be found in the
online help for the D 1000 S pro-
gram.
To Next Page
Loading...
Need help?
General
