Need help?Do you have a question about the Millimar C 1216 and is the answer not in the manual?
General| Brand | Millimar |
|---|---|
| Model | C 1216 |
| Category | Measuring Instruments |
| Language | English |
Explains how to move through the instrument's menu system and settings.
Identifies and describes the instrument's display, keypad, and status lamps.
Procedure to reset the instrument to its original factory default configuration.
Step-by-step guide to calibrate a single measuring channel for accuracy.
Calibrates the sensitivity of a second probe relative to the first for accurate comparison.
Sets a factor to adjust measurement values based on workpiece or lever ratios.
Defines the formula used to combine or compare probe inputs for feature calculation.
Guides selection between one-point and two-point master measurement methods.
Inputting the reference value from a master workpiece for one-point calibration.
Inputting reference values from two masters for two-point calibration.
Defines the maximum and minimum acceptable dimensions for a workpiece.
Sets alert thresholds to identify trends before tolerance limits are breached.
Defines the sequence and timing for automated measurements or cycles.
Configures the instrument for automated, timed measurement sequences.
Guides measurement of workpiece thickness or combined values.
To Next Page
