Chapter 2 Basic Operation
2-10
Perform test printing with the normal
test pattern
1
Press the
(TEST PRINT/CLEANING)
,
and press the key in LOCAL.
• TEST PRINT MENU will be displayed.
•Press [][] to change the test pattern
orientation.The orientation selected here will be
reflected on when you will print next time.
• When performing test printing after having
changed the orientation from "SCAN DIR." to
"FEED DIR.", the line is fed to the position of the
first test printing.
2
Press the key.
• Test printing starts.
• When the printing has been completed, the
screen returns to LOCAL.
3
Check the printed test pattern.
• When the result is normal, end the operation.
• When the result is abnormal, perform head
cleaning.（ P.2 - 11 ）
Perform test printing with the test
pattern for checking white ink
It makes easier to check if print the background to the
white ink locations in the pattern.
1
Press the
(TEST PRINT/CLEANING)
,
and press the key in LOCAL.
• TEST PRINT MENU will be displayed.
2
Press to select “SpotColor
Check”.
3
Press the key.
• Print a test pattern in the following orders.
(1) Print the pattern daubed with black.
(2) Dry the pattern for thirty seconds.
• When press the [ENTER] key, cancel waiting
time and shift to step (3).
(3) Return the media automatically and print the
test pattern.
4
Check the printed test pattern.
• When the result is normal, end the operation.
• When the result is abnormal, perform head
cleaning.（ P.2 -11）
Abnormal pattern
Clogged with ink
Normal pattern
Nozzles are dirty
Abnormal pattern
Clogged with ink
Normal pattern
Nozzles are dirty
To Next Page
Loading...
