Chapter 3 Machine setting
3-13
1
2
3
4
5
6
Setting the Display of Media Residual
Whether the screen displays the remaining amount of a
media is set.
1
Press the
(MENU)
(twice)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press to select “MEDIA
REMAIN”, and press the key.
3
Press to select ON/OFF.
4
Press the key.
5
Press the key several times
to end the setting.
Setting a LANGUAGE
You can change the displayed language.
1
Press the
(MENU)
(twice)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press to select “LANGUAGE”,
and press the key.
3
Press to select language, and
press the key.
4
Press the key several times
to end the setting.
Setting Time
You can set time of your country (time difference).
1
Press the
(MENU)
(twice)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press to select “TIME”, and
press the key.
3
Press to enter time,
and press the key.
• Year/Month/Day/Time selecting:
by the [][] keys.
• Year/Month/Day/Time inputting:
by the [][] keys.
4
Press the key several times
to end the setting.
Setting Unit (Temperature/ Length)
Units used by this machine are set.
1
Press the
(MENU)
(twice)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press the
(>>)
.
3
Press to select “UNIT/TEMP.” or
“UNIT/LENGTH”, and press the
key.
• MACHINE SETUP MENU will be displayed.
4
Press to select a set value, and
press the key.
• Set value of tempture :°C / °F
• Set value of length : mm / inch
5
Press the key several times
to end the setting.
When the media
remaining amount
display is turned to
"ON"
the remaining amount of a media is
displayed in Remote.
(However, when a leaf media is used,
the length of the media to be printed is
displayed.)
When the media
remaining amount
display is turned to
"OFF"
the remaining amount of a media is not
displayed in the Remote.
• The amount of a media that has been fed by the
printing and jog keys is reflected in the remaining
amount of a media.
• The length of a media (initial value of the
remaining amount) is entered when a roll media is
detected.( P.2-7)
• The setting configured here does not become
effective unless media detection is performed after
the setting has been complete.
• When set "ON" the media remaining display, you
can print the list of current media remaining
amount and the date. ( P.2-7)
• -20 hours to +4 hours can be set.
To Next Page
Loading...
