Chapter 4 Maintenance
4-6
MAINTENANCE MENUs at-a-glance
Item Set value Meaning
STATION
MAINTENANCE
For carrying out maintenance on the carriage and station periphery.
CARRIAGE OUT
(P.4-7)
Moves the carriage out, for carrying out cleaning of the cap periphery,
head, wipers, etc.
NOZZLE WASH
(P.4-8)
1 to 99min
Soaks the nozzle surfaces in maintenance cleaning fluid, for carrying
out recovery from nozzle clogging or bent.
DISWAY WASH
(P.4-9)
Executes washing of the suction pump tubes.
CUSTODY WASH
(P.4-9)
1 to 99min
Carried out when the machine is going to be out of use for an extended
period. Washes the nozzles and tubes beforehand, to keep the
machine in fine condition.
WIPER EXCHANGE
(P.4-14)
Used when replacing the wiper. If the wiper is replaced, the number of
times the wiper was used that is managed in this device is reset.
AUTO
MAINTENANCE
( P.4-12)
For having the various maintenance functions executed automatically. Set the execution interval for each
maintenance function.
REFRESH The set value will
differ according
to the ink type
being used.
For setting the activation interval for refresh.
CLEANING For setting the activation interval for head cleaning.
CLEANING TYPE
NORMAL/ SOFT/
HARD
For setting the type of head cleaning.
INK FILLING
( P.4-13)
Supplies ink to correct nozzle clogging.
INK TANK
EXCHANGE
( P.4-16)
Resets or corrects the used count for the waste ink tank.
To Next Page
Loading...
