4-12
Chapter 4 Maintenance
5
Use a clean stick soaked in maintenance
cleaning fluid to wipe ink off the head
surface or other surfaces.
• Never rub the nozzles.
6
Press the key after the cleaning.
7
Close the maintenance cover, and press
the key.
• After its initial operation, the machine returns to
LOCAL.
Automatic Maintenance
Function
To use this machine comfortably, you can set various
maintenances to be performed automatically.
Here, set performing intervals of various automatic
maintenances.
You can prevent troubles such as ink clogging by
performing automatic maintenance periodically (automatic
maintenance function).
For the auto maintenance functions, the following items
can be set:
Setting the Refreshing Intervals
The interval between each operation of ejecting a small
amount of ink from the nozzles to prevent nozzle clogging
is set.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press , and press the key.
• “AUTO MAINTENANCE” will be selected.
3
Press the key.
• “REFRESH” will be selected.
4
Press to set the refreshing
interval, and press the key.
• Set value : The set value will differ according to
the ink type being used.
5
Press the key several times
to end the setting.
• When you perform maintenance manually, after
manual maintenance is completed and when time
set with the automatic maintenance function has
passed, maintenance starts automatically.
Clean the side surface of the head
(shown in deep gray) with a clean stick.
The nozzle part (Never
touch it.)
Clean with a clean stick or a waste cloth.
Function name
Descriptions
REFRESH
The interval between each refreshing
operation is set.
CLEANING
(Interval)
The interval between each cleaning operation
is set.
CLEANING (
Type
) The cleaning type is set.
• If the “Check waste ink” warning message is
displayed, the operation set in the auto
maintenance function is not carried out. Perform
the operations of P.4-15 “Replace the waste ink
tank with another” if required.
• When the power switch on the front of the machine
is turned off, check the waste ink tank.
To Next Page
Loading...
