Chapter6 Appendix
6-2
Specifications
Machine specifications
Item JV300-130 A JV300-160 A JV300-130 A Plus JV300-160 A Plus
Print head
Method Drop-on-demand piezoelectric print heads
Specification 2 head staggered
Printing mode (scan x feed) 360×360dpi/ 540×360dpi/ 540×720dpi/ 720×1080dpi/ 720×1440dpi/ 1440x1440dpi
Usable inks Sublimation dye ink (Sb) : 6-colors (Y, M, Bl, K or Dk, Lbl, Lm)
Ink supply
Supplying from ink cartridges through tubes.Ink cartridge replacement type :
Supplying by Toggle switch over with 2 cartridges/color (4-colors ink set)
Capacity of ink cartridge Y, M, Bl, K, Dk, Lbl, Lm : 440cc cartridge
Usable media Photo-paper , Synthetic paper , Duplex paper
Max. printing width 1361mm (53.6in) 1610mm (63.4in) 1361mm (53.6in) 1610mm (63.4in)
Roll Media size
Maximum 1371mm (54.0in) 1620mm (63.8in) 1371mm (54.0in) 1620mm (63.8in)
Minimum 210mm (8.3in)
Thickness 1.0mm or less (0.04in or less)
Roll outside
diameter
*1
Paper media : Φ250mm or less (Φ9.8in or less)
Other media : Φ210mm or less (Φ8.3in or less)
Roll weight
*1,
*2
40kg or less (88.2lb or less) 45kg(99.2 lb) or less
Roll inside
diameter
2 or 3 inches
Printing sur-
face
Side facing outward
Roll end treat-
ment
The roll end is gently fixed to the core with weak-adhesive tape or weak glue for easy
removal.
Leaf media size
Maximum 1371mm (54.0in) 1620mm (63.8in) 1371mm (54.0in) 1620mm (63.8in)
Minimum 210mm (8.3in)
Margin
Leaf media
Left end and right end : 15 mm (0.6 in) (Default)
Front :120 mm (4.7 in) Rear : 150 mm (5.9 in)
Roll media
Left end and right end : 15 mm (0.6 in) (Default)
Front :120 mm (4.7 in) Rear : 150 mm (5.9 in)
Distance accuracy
Absolute accu-
racy
Whichever the larger one of ± 0.3 mm (0.01 in) or ± 0.3% of the designated
Reproducibility Whichever the larger one of ± 0.2 mm (0.008 in) or ± 0.1% of the designated
Perpendicularity ± 0.5 mm / 1000 mm (± 0.02 in / 39.4 in)
Media skew 5 mm or less / 10 m (0.2 in or less / 32.8 ft)
Head height adjustment
Select for manual 3-stage (2.0/2.5/3.0) + 1 mm (0.04 in) or + 2 mm (0.08 in) at instal-
lation. Base height can be raised.
Cutting of media
Cutting of Y direction by the head cutter. Cutting accuracy (steps) : 0.5 mm or less.
(0.02 in or less.)
Waste ink tank Bottle type (2,000 cc)
Interface
Print data
transfer
USB 2.0
USB 2.0 、Ethernet 1000BASE-T
E-mail function Ethernet 10 BASE-T / 100 BASE-TX / 1000BASE-T
Command MRL- V
Noise
during standby Less than 58 dB (A) (FAST-A, Front & Rear & Left & Right 1 m (3.3ft))
during continu-
ous printing
*3
Less than 65 dB (A)
during discon-
tinuous print-
ing
Less than 70 dB (A)
To Next Page
Loading...
