Chapter 3 Machine setting
3-14
Setting a KEY BUZZER
You can turn off the buzzer sound when pressing the key.
1
Press the
(MENU)
(twice)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press the
(>>)
.
3
Press to select “KEY BUZZER”,
and press the key.
4
Press to select a set value, and
press the key.
• Set value : ON/ OFF
5
Press the key several times
to end the setting.
Setting the CONFIRM. FEED
Set whether media feeding is performed for checking the
result of the test printing etc. or not.
1
Press the
(MENU)
(twice)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press the
(>>)
.
3
Press to select “CONFIRM.
FEED”, and press the key.
4
Press to select a set value, and
press the key.
• Set value : ON/ OFF
5
Press the key several times
to end the setting.
Setting the SPACE FEED MODE
Change the feed mode of the margin included in the
image data (the space of no data to be printed). If print
data with much margin, set to “continuous”, then the print
time can be shorten.
1
Press the
(MENU)
(twice)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press the
(>>)
.
3
Press to select “SPACE FEED
MODE” , and press the key.
4
Press to select a set value, and
press the key.
INTERMITTENT：
Perform intermittent feed
operation of the path division unit
CONTINUOUS ：Feed the no data part at a time
5
Press the key several times
to end the setting.
Set the network
You can also perform network setting with “Network
Configurator”, the tool to perform network setting of
Mimaki’s product. To download the Network Configurator,
check " Driver / Utility" on the download page at Mimaki
Engineering (https://mimaki.com/download/).
1
Press the
(MENU)
(twice
times)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press the
(>>)
.
3
Press to select “NETWORK”,
and press the key.
4
Press the key.
• “CHECK IP ADDRESS” will be selected.
• The IP address currently used by this machine is
displayed.
• When you have finished the check, press the
[ENTER] key.
5
Press , and press the key.
• “CHECK MAC ADDRESS” will be selected.
• The MAC address currently used by this machine
is displayed.
• When you have finished the check, press the
[ENTER] key.
• When the key buzzer is set to "OFF", the buzzer
sound for errors, warnings, operation completion,
etc. cannot be shut off.
• After connecting with the network, it takes time until
the IP address is determined. If the IP address has
not been determined, “0.0.0.0” is displayed.
To Next Page
Loading...
