Chapter 3 Machine setting
3-11
1
2
3
4
5
6
MACHINE SETUP MENU table
Function name Set value Default Meaning
AUTO Power-off ( P.3-12)
NONE/
10 ~ 600min
30min
When no operation has been performed for the
set time, the power supply is automatically
turned “OFF”.
AUTO Power-on
(Plus series)
(P.3-12)
SETUP ON/OFF OFF
The machine starts automatically at the set day
of the week and time.
Time 0:00 ~ 23:59 [1 minute unit] 0:00
Day Each day of the week. ON/OFF ON (All)
Drying/Exhaust FAN
Set when use the optional Drying / exhaust fan. For more information, please refer to the
instruction manual that came with the Drying/exhaust fan.
MEDIA REMAIN ( P.3-13) ON/ OFF OFF You can control the remaining amount of media.
LANGUAGE ( P.3-13) English Displayed language is changed.
TIME ( P.3-13) +4h ~ -20h
Japan time
Time difference is corrected.
UNIT/ TEMP. ( P.3-13) °C (Centigrade)/°F (Fahrenheit) °C A unit for displaying temperature is set.
UNIT/ LENGTH ( P.3-13) mm / inch mm A unit for displaying length and area is set.
KEY BUZZER ( P.3-14) OFF / ON ON A buzzer sound when keys are pressed is set.
CONFIRM. FEED ( P.3-14) ON / OFF ON
Set whether media feeding is performed for
checking the result of the test printing etc. or not.
SPACE FEED MODE ( P.3-14)
INTERMITTENT /
CONTINUOUS
INTERMI
TTENT
Change the feed mode of the margin included in
the image data.
NETWORK
(P.3-14)
Set the network.
Check IP Addr. The IP address currently used by this machine is displayed.
Check MAC Addr. The IP address currently used by this machine is displayed.
DHCP ON / OFF -
When it is ON, the IP address given by the
DHCP server is used.
AutoIP ON / OFF -
When it is ON, the IP address is determined by
the AutoIP protocol. However, DHCP is ON,
DHCP has priority.
IP Address
*1
Set the IP address used by this machine.
Default Gateway
*1
Set the default gateway used by this machine.
DNS Address
*1
Set the DNS server address used by this machine.
SubNet Mask
*1
Set the digit number of the subnet mask used by this machine.
EVENT MAIL
Mail Delivery
(P.3-15)
ON / OFF OFF
Set whether you send/ do not send the e-mail
when the set event occurs.
Select Event
(P.3-16)
Print Start
Event
ON / OFF OFF
Set whether you send/ do not send the e-mail at
the start of printing.
Print End Event ON / OFF OFF
Set whether you send/ do not send the e-mail at
the end of printing.
Error Event ON / OFF OFF
Set whether you send/ do not send the e-mail
when a error occurs.
Warning Event ON / OFF OFF
Set whether you send/ do not send the e-mail
when a warning occurs.
Other Event ON / OFF OFF
Set whether you send/ do not send the e-mail
when an event other than the above occurs.
Mail Address
(P.3-16)
Set the e-mail address to which
you send the event mail.
-
Alphanumeric characters and symbols (within 96
characters)
Message Subject
(P.3-16)
Set the characters to write in the
subject of the event mail.
-
Alphanumeric characters and symbols (within 8
characters)
Server Setup
(P.3-17)
SMTP Address - Set the SMTP server.
SMTP Port No. - Set the SMTP port number.
SENDER ADDRESS -
Set the e-mail address to be used as the sender
mail address.
Server Setup
(P.3-17)
Authentication
POP before
SMTP
-
Set the SMTP server authentication method
(SMTP authentication).
SMTP
Authentication
-
OFF
-
User Name
*2
- Set the user name used for the authentication.
Pass Word *2 - Set the password used for the authentication.
To Next Page
Loading...
