MIMAKI JV300-160 A - Page 55

Chapter 3 Machine setting
3-17
1
2
3
4
5
6
Set the server
1
Press the
(MENU) (twice
times)
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press the
(>>)
.
3
Press to select “EVENT MAIL”,
and press the key.
4
Press 4 times, and press the
key.
• “SERVER SETUP” will be selected.
5
Press the key.
• “SMTP ADDRESS” will be selected.
6
Press to set SMTP
Address, and press the key.
• Press the jog key [][][][] to set SMTP
address.
• Input the SMTP address name.
7
Press , and press the key.
• “SMTP PORT No.” will be selected.
8
Press to set SMTP Port No., and
press the key.
• Set the SMTP port number.
9
Press , and press the key.
• “SENDER ADDRESS” will be selected.
10
Press to set SENDER
ADDRESS, and press the key.
•Press [][][][] and set the e-mail address to
be used as the sender mail address.
• Set it with alphanumeric characters and symbols
within 64 characters.
11
Press , and press the key.
• “AUTHENTICATION” will be selected.
12
Press to set authentication
method, and press the key.
• Set the authentication method of the SMTP
server.
• When you select [OFF], proceed to the Step 20.
13
Press , and press the key.
• “USER NAME” will be selected.
14
Press to set User
Name, and press the key.
•Press [][][][] to set the user name to use
for the authentication.
• Set it with alphanumeric characters and symbols
within 30 characters.
15
Press , and press the key.
• “PASSWORD” will be selected.
16
Press to set Pass
Word, and press the key.
•Press [][][][] to set the password to use for
the authentication.
• Set it with alphanumeric characters and symbols
within 15 characters.
• When you select [POP before SMTP] in the Step
11, set the items in the Step 16 to 19.
17
Press , and press the key.
• “POP3 ADDRESS” will be selected.
18
Press to set POP3
Address, and press the key.
•Press [][][][] to set POP server.
• Input the POP server name.
19
Press , and press the key.
• “APOP” will be selected.
20
Press to set ON/ OFF, and press
the key.
21
Press the key several times
to end the setting.
• Depending on your server, if you do not
set the e-mail address not supporting the
account, sending/ receiving e-mails may
be unavailable.
• On the password setting screen, you can
only check the value that you are currently
inputting.