MIMAKI JV300-160 A - Page 61

This chapter
describes the items required to use this machine more comfortably, which are the
methods for the daily care, the maintenance of the ink cartridges etc.
Maintenance .................................................4-2
Precautions for Maintenance ...................... 4-2
About Cleaning Solution.............................. 4-2
Cleaning the Exterior Surfaces ................... 4-2
Cleaning the Platen ..................................... 4-2
Cleaning the Media Sensor ......................... 4-3
Cleaning the Media Press ........................... 4-3
Replace the CP pad set .............................. 4-4
Cleaning or replace the pinch roller ............ 4-4
About MAINTENANCE MENU ......................4-5
MAINTENANCE MENUs at-a-glance .......... 4-6
Maintaining the Capping Station ...................4-7
Cleaning the Wiper and Cap ....................... 4-7
Washing the Head Nozzle ........................... 4-8
Washing the Ink Discharge Passage .......... 4-9
When the Machine Is Not Used for a Long
Time ............................................................ 4-9
Cleaning the Ink Head and the Area around
It ..................................................................4-11
Automatic Maintenance Function ................4-12
Setting the Refreshing Intervals .................4-12
Setting the Cleaning Intervals and Type ....4-13
Fill up Ink .....................................................4-13
Replacing consumables ..............................4-14
Replacing the wiper ...................................4-14
If a Waste Ink Tank Confirmation Message
Appears .....................................................4-14
Replacing the waste ink tank before the
waste ink tank confirmation message is
displayed ....................................................4-16
Replacing the Cutter Blade ........................4-16
Chapter 4
Maintenance