MIMAKI JV33-160 - Printer Rear Panel Cover Removal

Overhaul of Covers
3-5
Printer Rear Panel
Put cover inside the washer of loosened screws to tighten them.
ICU Cover
1. Remove the screws (x4)
2. Remove the cover
ICU Cover R
1. Remove the screws (x6)
2. Loosen the lower screws (x2)
3. Remove the cover
Left Cover
1. Remove the screws (x6)
2. Remove the cover
Power BOX Cover
1. Loosen the lower screws (x2)
2. Remove the screws (x6)
3. Remove the cover
Wiring Cover
1. Remove the screws (x6)
2. Remove the connector
3. Remove the cover
Platen Cover
1. Remove the screws (x8)
2. Loosen the screws (x5)
3. Remove the cover
Rear Cover
1. Remove the screws (x6)
2. Loosen the lower screws (x2)
3. Remove the cover
Exhaust Cover
1. Remove the screws (x4)
2. Remove the cover
PC Cartridge Cover
1. Remove the screws (x4)
2. Remove the cover
Y Cover
1. Remove the screws (x4)
2. Remove the cover
OK NG
The washer of the screw
is outside of the cover.
The washer of the screw
is inside of the cover.