Overhaul of Ink-related Parts
3-9
Filling Ink
* Take the right procedure to save ink and improve work efficiency
1
Set media and turn the power ON.
2
Execute “FILL UP INK”.
Adjustment of the head angle
1
Select “SLANT ADJUST” from the
operation menu to execute adjustment
pattern drawing.
2
Move the head over the platen.
3
Move the adjustment lever to adjust the
head angle.
Lift up the two AD locking levers to release the
lock before moving the adjustment lever.
* Movement distance of one graduation of the
adjustment lever is 40 µm
Power ON.
<LOCAL.1> [#01] FUNCTION
MAINTENANCE <ent>
[FUNC]
Fill up ink
HD.MAINTENANCE
FILL UP INK <ent>
MAINTENANCE
HD. MAINTENANCE<ent>
Power ON.
<LOCAL.1> [#01] FUNCTION
ADJUST <ent>
[FUNC]
#ADJUST /PRINT
HEAD ADJUST <ent>
Adjust pat-
tern drawing
#SLANT ADJUST
PRINT START :ent
#HEAD ADJUST
SLANT ADJUST :ent
AD locking lever
Adjustment lever
To Next Page
Loading...
