Overhaul of Driving Parts
3-35
3-6-3. Y-axis Drive Pulley
1
Turn the main power supply of the printer off.
2
Remove the front cover (x4 screws), the Y cover C (x4 screws), the right cover (x9 screws) and the
KB cover (x4 screws). (See P.3-4 )
3
Remove the KB bracket screws (x4),
then disconnect the connector and
remove the keyboard.
Always ensure that the main power supply is off when the power is off. This procedure
is extremely dangerous if the sleep function is mistakenly activated instead.
６
２
３
Ｚ
Ｚ
To Next Page
Loading...
