Color Inkjet Printer JV33-130/160
3-36
4
Remove the Y-axis motor cover (right
side: 2 screws, left side: 2 screws).
Manually move the head over the platen before
removing the left-side screws (x2).
5
Remove the screws (x2) that hold the
washing cartridge assembly in place,
and slide the washing cartridge assem-
bly towards the back.
6
Remove the screw (x1) from the top of
the Y-axis drive pulley.
7
Loosen the screws (x2) from the Y-SP
plate on the left side of the main unit,
and release the tension on the Y-axis
drive belt.
To Next Page
Loading...
