MIMAKI JV33-160 - Test

Color Inkjet Printer JV33-130/160
2-52
2-3-8. TEST
#TEST
FUNCION / Λ / V
6- Colors =: KMCYmc
8= Colors =: KMCY 1234
PATTERN :50 %, 25% ,12 .5% ,6. 25%
NOZZLE CHECK
ENTER
END
ENTER
ENTER
ENTER
Λ / V
Λ / V
END
END
END
END
END
ENTER
ENTER
ENTER
END
END
END
:ON
JOG operation is allowed
REM O TE
ENTER /END
TEST DRAW ING
TEST
Alternatively displayed at drawing
ENTER
ENTER
ENTER
FUNCION / Λ / V
END
ENTER
ENTER
Operation star t
ENTER
ENTER
Operation star t
ENTER
HEATE R
Λ / V
Λ / V
ENTER
Cap OFF
Test operation start
ENTER
FUNC
100~4000pps(at 100pps unit)
CONTINUE,1~1000times
(at 1time unit)
End o f
count
Λ / V
ENTER
FORW ./REVR .
CONT ./ 100 ～ 4000
Λ / V
Cap OFF/Valve CLOSE
Test operation start
ENTER
Terminate with
[END] key at
CONTINUE
End of
count
Return to the state
before starting the test
Return to the state
before starting the test
Terminate with
[END ] ke y at
CONTINUE
END
END
Λ / V
Test Operation start
ENTER ENTER
Operation star t
ENTER
Λ / V
Λ / V
END
Λ / V
Λ / V
Λ / V
ENDENTER
ENTER
FUNC IO N / Λ / V
FUNC IO N / Λ / V
#TEST 2
HEATE R
/END
/ 30sec
/ Error
ENTER
FUNC
Set the status of the operating
carriage and motor
Check the operating
conditions set
#TEST
CHECK PATTERN <ent>
#CHECK PATTERN
PATTERN:100%
X=123450 Y=1234
COLOR :KMCY
#CHECK PATTERN
PATTERN:COLOR CHART
#CHECK PATTERN
PATTERN:DROP.POS CHK
DPI :360x360
SCAN:Uni-D / PASS:1
X=123450 Y=1234
DENSITY :ALL
DPI :360x360
SCAN:Uni-D / PASS:1
X=123450 Y=1234 DPI :360x360
SCAN:Uni-D / PASS:1
PATTERN DRAW ING
#CHECK PATTERN /100%
DRAW :ent
#CHECK PATTERN 100%
Hi-SPEED SCAN :OFF
360x360.V1. 4P.Uni
x1.H1 0.00m
#TEST
ALL PATTERN <ent>
#ALL PATTERN
PRINT START :ent
#Y SERVO * RUNNING *
COUNT= 0
#TEST
MOTOR TEST <ent>
#MOTOR TEST
X SERVO MOTOR <ent>
#MOTOR TEST
Y SERVO MOTOR <ent>
#MOTOR TEST
XY SERVO MOTOR <ent>
PRE PRT AFT
35ﾟC 40ﾟC 50ﾟC
#MOTOR TEST
WIPER MOTOR <ent>
SPEED :WAIT :COUNT
100 : 0 :CONT.
#MOTOR TEST
PUMP MOTOR <ent>
#PUMP MOTOR
DIR=FORW. SPD=1017
PUMP * RUNNING *
COUNT= 0
#MOTOR TEST
TAKE-UP MOTOR <ent>
#TAKE-UP MOTOR
START :ent
#TAKE-UP MOTOR
*** RUNNING ***
#XY SERVO* RUNNING *
COUNT= 0
#X SERVO MOTOR
S=*** A=*.** X=****
#Y SERVO MOTOR
S=*** A=*.** Y=****
S=*** A=*.** X=****
S=*** A=*.** Y=****
S=*** A=*.** X=****
S=*** A=*.** Y=****
S=****mm/s A=*.**G
Y=****mm
S=***mm/s A=*.**G
X=*****mm
#X SERVO * RUNNING *
COUNT= 0
SPEED :WAIT :COUNT
100 : 0 :CONT.
WIPER * RUNNING *
COUNT= 0
PUMP * RUNNING *
DIR=FORW. SPD=1017
40ﾟC 50ﾟC 35ﾟC
( 35 40 50 )
<CARRIAGE>:< MOTOR >
OUT : ON
[＜] [＞]:Select (Pre/Print /After)
[∧] [∨]:Adjust temperature
The operation for Y and XY
SERVO is th e sa m e.
Check the operating
conditions set
Check the operating
conditions set
Check the operating
conditions set
Check the operating
conditions set
ENTER
As for the detail of "TEST Function" ( p.2-27) .