Color Inkjet Printer JV33-130/160
2-34
PAPER SENSOR
Paper width sensor is tested.
Cap OFF (station moved to the lowest position), reading of paper width sensor is displayed.
***
(@@@,$$$) @@@ : Sensor reading at SLOP-ON
$$$ : Sensor reading at SLOP-OFF
***
: Difference between @@@ and $$$
Sensor reading is updated periodically (every 150 msec).
[], []:Head move
[], []:Alternately move to paper existing position and non-existing position in the right end of
media.
[END]
:After cap ON, paper sensor ends
KEYBOARD TEST
Panel SW is tested.
When a panel SW is pressed, name of the SW is displayed on LCD.
When no key is pressed, “NONE” is displayed.
When
[END]
is pressed, “END TEST” is displayed and the keyboard test ends.
LCD TEST
Characters are displayed on LCD.
When the LCD Test is started, scrolling of character code of 0x21 ~ 0xFF in one line is repeated. Press
[END]
to stop the test.
TIMER CHECK
Confirmation and setting of date and time of the device.
Inputting of past date is only allowed present day -8H. Other date is an error.
*Machine setting Same as the time setting
Set value:20YY.MM.DD HH:MM:00
YY : 00~50
MM : 01~12
DD : 01~31
HH : 00~23
MM : 00~59
Returning to the last setting is allowed by pressing
[FUNCTION]
in the Date, Time Display State (not the
Entering State). (However, the time elapsed after the setting change is added.)
To Next Page
Loading...
