MIMAKI JV33-160 - Check Pattern

Color Inkjet Printer JV33-130/160
2-28
CHECK PATTERN
The following 4 types of drawing are allowed in check pattern. Procedure of pattern drawing is shown in
the table below
• Density pattern
• NOZZLE CHECK
• COLOR CHART
•DROP.POS CHK
*1 COLOR CHART, DROP.POS CHK do not have these items.
*2 Density pattern, NOZZLE CHECK and DROP.POS CHK do not have these items.
Fig.2-9
<Check pattern drawing procedure>
No. Item Content
1 Selection of density*
2
ALL, 100%, 50%, 25%, 12.5%, 6.25%
2 Selection of resolution 540x 720, 540x 900, 540x1080, 720x 540
720x 720, 720x1080, 720x1440, 1440x1440
3 Selection of can
direction
Bi-D, Uni-D
4 Selection of No. of
passes
Resolution Passes(4 color) Passes(6 color)
540x720: 2,4,8,16 4,8,16,32
540x900: 5,10,20,40 5,10,20,40
540x1080: 3,6,12,24 6,12,24,48
720x540: 3,6,12,24 3,6,12,24
720x720: 2,4,8,16 4,8,16,32
720x1080: 3,6,12,24 6,12,24,48
720x1440: 4,8,16,32 8,16,32,64
1440x1440: 8,16,32 16,32,64
5 Selection of drawing size X size: 10 mm ~ paper length (unit: 10 mm) *Roll paper: 500000 mm
Y size: 10 mm ~ paper width (unit: 10 mm)
6 Selection of drawing
color*
1
6 colors: M,C,Y,K,c,m (M, B, Y, K, b, m with Sublimation5 ink)
4 colors: M,C,Y,K (M, B, Y, K, with Sublimation5 ink)
7Drawing start
(waiting for key input)
[ENTER] :Drawing start
[TEST] : Execution of test drawing
[(JOG)]: JOG operation mode
Press
[ENTER] to start drawing with setting the current position as the original
position.
[REMOTE] : Setting of high speed scan ON/OFF
[END] : END of drawing
Feed
Scan
<Example of DROP.POS CHK pattern printing>