Overhaul of Driving Parts
3-31
3-6-2. Y-axis Motor
Content
A summary of the series of operations to perform when replacing the Y-axis motor, is described along with the
procedure.
Removing/Installing Y-axis Motor Assembly
1
Turn the main power of the printer off.
2
Remove the right cover (x9 screws), and the KB cover (x4 screws). (See P.3-4 )
Item Description
Reference
page
1. Removing/Installing the Y-
axis motor assembly
Replacing the Y-axis motor assembly.
p.3-29
2. Adjusting the Y-axis motor
supply current
Adjust if there is a hunting noise when the motor is driven.
p.3-34
Be sure to shut the main circuit breaker to prevent unexpected move.
To Next Page
Loading...
