Need help?Do you have a question about the MIMAKI JV33-160 and is the answer not in the manual?
Describes the manual's structure and chapters.
Lists related documents for the printer.
Explains the meaning of symbols used in the manual.
Shows the locations of caution labels on the printer.
Details precautions to be taken before and during maintenance.
Lists the tools and measuring instruments needed for maintenance.
Provides technical specifications for the main unit.
Explains the fundamental operational principles of the printer.
Details various functions available on the printer.
Outlines the sequence of operations for maintenance tasks.
Slant adjust, Dot position adjust.
Cleaning of head, damper, tube.
Manual cleaning of head, damper, tube.
Initialization of the selection parameter.
Drawing various types of check patterns.
Operation test of various motors.
Test of media heater.
Test of various sensors.
Update device F/W or rewrite ink information.
Upload/download parameter and log data via USB.
Starts the device in maintenance open state.
Initialize system parameters.
Initialize maintenance parameters.
Initialize custom parameters.
Describes the chapter's content on disassembly and reassembly.
Details procedures for removing and replacing printer covers.
Covers overhaul procedures for ink-related components.
Details overhaul procedures for Printed Circuit Boards (PCBs).
Explains overhaul procedures for various sensors.
Details overhaul procedures for driving components.
Covers overhaul procedures for other drive system parts.
Lists tools and jigs for disassembly and reassembly.
Details removal of front panel covers.
Details removal of rear panel covers.
Details procedures for head unit maintenance.
Details procedures for pump motor overhaul.
Details procedures for capping assembly overhaul.
Details procedures for washing cartridge assembly parts.
Details procedures for overhauling the main PCB.
Details procedures for overhauling the station PCB.
Details procedures for overhauling the X-axis motor.
Details procedures for overhauling the Y-axis motor.
Details procedures for overhauling the Y-axis drive pulley.
Details procedures for overhauling the Y drive belt.
Details procedures for overhauling the wiper unit.
Details procedures for overhauling the cutter unit assembly.
Details procedures for overhauling the linear scale.
Details procedures for adjusting the station height.
Introduces the troubleshooting chapter and approach.
Addresses issues indicated by error messages and corrective actions.
Provides detailed methods for addressing malfunctions, including electrical troubleshooting.
Lists specific error messages, causes, and remedies.
Lists warning messages, causes, and corrective actions.
Explains electrical causes of print head damage and their countermeasures.
Overview of printer's electrical components and circuit boards.
Details specifications for various circuit boards.
Presents the electronic block diagram illustrating component connections.
Specifications and block diagrams for the Main PCB.
Details specifications for the PRAM PCB.
Details specifications for the Station PCB.
Details specifications for the X-axis motor relay PCB.
Details specifications for the Ink slider PCB.
Details specifications for the Keyboard PCB.
Details specifications for the Encoder PCB.
Details specifications for the Take-up PCB.
Details specifications for the Head memory PCB.
Details specifications for the LED PCB.
Shows the connection diagram for components within the main unit.
Illustrates connections for external units like fans and motors.
To Next Page
General