Mindray BeneLink - Page 131

BeneLink Module Operator’s Manual 4-55
Monitor output: alarms from Hamilton G5 (Block Protocol) Ventilator
Priority Label
High
Apnea
Apnea Ventilation
SpO2 Low
SpO2 High
MV Low
MV High
Loss of PEEP
Medium
RR High
RR Low
EtCO2 High
EtCO2 Low
Technical alarms
Hi
gh
Patient Disconnected
Air Supply Pressure Low
O2 Supply Pressure Low
O2 cell disconnect
O2 cell cal. Needed
Power Failure
Check Flow Sensors
No Gas Supply Pressure
Disconnection ventilator side
Hi
gh
Technical
alarms
If the monitor shows the alarm [High Technical
alarms], the external device has one or more of the
following alarms:
Wrong Flow Sensor type
O2 cell defective
Disconncetion
Low internal pressure