4-56 BeneLink Module Operator’s Manual
Monitor output: alarms from Hamilton G5 (Block Protocol) Ventilator
Priority Label
High
High
Technical
alarms
High pressure during sigh
Pressure not released
Exhalation obstructed
TF5514:Check loudspeaker
Internal battery empty
Ventilator unit connection lost
Check internal battery
Medium
O2 an
d air supply
O2 and heliox supply
Medium
Technical
alarms
If the monitor shows the alarm [Medium Technical
alarms], the external device has one or more of the
following alarms:
High leak
Low tidal volume
High tidal volume
Turn the Flow Sensor
APV init failed
Internal battery low
Panel connection lost
Heliox supply failed
SpO2: sensor error(left slot)
SpO2: sensor error(right slot)
SpO2: no sensor (left slot)
SpO2: no sensor (right slot)
SpO2: patient disconnected (left slot)
SpO2: patient disconnected (right slot)
SpO2: light interference (left slot)
SpO2: light interference (right slot)
To Next Page
Loading...