4-78 BeneLink Module Operator’s Manual
Monitor output: alarms from Newport E360 Ventilator
Priority Label
Hi
gh
O2 Su
pply Pressure Low
Check Flow Sensors
Patient Disconnected
Power Failure
Tinsp too Short
High
Technical
alarms
If the monitor shows the alarm [High Technical
alarms], the external device has one or more of the
following alarms:
Device Alert
No O2 Power-Up
Control EEPROM Failure
Low Battery
Transducer Error
Mon Internal System Failed
Ctrol Internal System Failed
Air Servo Valve Leak
O2 Servo Valve Leak
Control RAM Failed
Control ROM Failed
Control CPU Failed
Monitor RAM Failed
Monitor ROM Failed
Monitor CPU Failed
Dual RAM Failed
Monitor Tasks Failed
Control Processor Failed
Control Tasks Failed
Monitor Processor Failed
To Next Page
Loading...