6-2 Software Installation & Maintenance
6.2 Software Installation/Restoration
See
Software Recovery Guide
for detailed system operations and Doppler system restoration.
6.3 Activating Windows 10 Operating System
NOTE: After OS is upgraded from Windows 7 to windows 10 or Windows 10 is recovered, Windows
10 needs to be activated.
6.3.1 Online Activation
Make sure the ultrasound system is connected to the internet.
Perform the following procedure:
1. Go to [Setup] > [Maintenance] > [Setup] > [Enter Windows], and input the password.
For details about obtaining password, please refer to "6.4 Enter Windows".
2. Input “Control Panel” in the address column in the pop-up Windows Explorer and press [Enter]
key to display Control Panel.
WARNING:
1.
To avoid data loss, back up user’s preset data and patient data
before system restores.
Do Not cut off, shut down or restart the system in the restoration.
To Next Page
Loading...
