11-6 DICOM/HL7
DICOM storage preset items are described as follows:
After setting the servers in the DICOM local screen, the
names will appear in the drop-down list. Select the name of
the storage server.
The default is xxx-Storage, user-changeable.
Application Entity title. It should be consistent with that of
the storage server.
DICOM communication port, 104 is the default. The port
should be consistent with that of the storage server port.
Select whether to encrypt the data during network
transportation.
Refers to the amount of time after which the system will
stop trying to establish a connection to the service.
Select the Compression mode: uncompressed, RLE, JPEG
and JPEG2000.
Select the JPEG Compression ratio: lossless, low, medium
and high.
If SCP supports this function, select it.
Set the frame range for transferring cine files to DCM multi-
frame files.
Select structured report sending options.
Select whether to encapsulate PDF format reports in
DICOM standard.
Set the storage mode for image and cine file:
Parallel file: save the current file, and is ready for the
storage of the next file.
Parallel frame: send the current frame, and is ready for
sending the next frame.
Files of images that are saved in DCM format through
DICOM contain transducer serial number information.
Add the DICOM service to the service list.
Select to cancel parameter setting.
Select an item in the service list, change the parameters in
the above area, and tap [Update] to update the item in the
service list.
Select to delete the selected service from the service list.
Select an item in the service list. Tap [Default] and you will
see “Y” in the Default column.
To Next Page
Loading...
