Mindray TE7 - Installing a Video Printer; Brightness and Contrast Adjustment

3-10 System Preparation
3.8 Installing a Video Printer
The system support video printers, consist of the B/W digital printers and color digital printers.
1. Position the printer in the proper place.
2. Plug the printer power cord into an appropriate outlet.
3. Use a USB cable to connect between the system's USB port and the printer's USB port.
4. Load a paper roll, and turn on the system and printer.
5. See section “3.7 Installing a Graph/Text Printer” for the driver installation procedure (printer
drivers listed in chapter “2.3.4 Peripherals Supported” are installed already).
3.9 Brightness and Contrast Adjustment
1. Tap in the top-right corner of the screen to open the system tool bar.
2. Drag the slider to change the brightness/contrast on the brightness control or contrast
control .
NOTE:
Avoid operating in direct sunlight or the touch screen could be obscured.