A-2 Wireless LAN
Wi-Fi function is not affected when the system is imposed with radiation interference complied with
IEC60601-1-2:2007 standard.
A.1 Use the Wireless feature
1. Tap in the top-right part of the screen to open the wireless network manager.
2. Tap to select the target network, tap [Connect] to connect to the network.
When connecting an encrypted network, enter the password in the box first. You can select to hide
password characters or not.
3. The system tries to connect to the selected network. The icon turns into after successful
connection.
4. Tap [Refresh] to refresh the "Wireless Network Connection" list.
IP Configuration
When the system background is processing network task (DICOM sending for example),
please do not enter network setting to change the IP, otherwise the background task may
fail. You can check if there are tasks undergoing in the task manager.
IP configuration is used for setting local network parameters, which is also applied to DICOM
connection.
1. In Wireless network manager screen, tap [IP Config] to open the page:
To Next Page
Loading...
Need help?
General
