Mindray TE7 User Manual

5-34 Image Optimization
Display Format
Description
This function is to adjust the display of the image.
Operation
Adjust through the [Display Format] item in the menu.
5.8.1.3 Exit
 In Free Xros M mode, tap [Free Xros M] or [B] to exit.
5.9 TDI
TDI mode is intended to provide information of low-velocity tissue motion, specifically for cardiac
movement.
There are 4 types of TDI mode:
 Tissue Velocity Imaging (TVI): This imaging mode is used to detect tissue movement with
direction and speed information.
 Tissue Energy Imaging (TEI): This imaging mode reflects the status of cardiac movement
by displaying the intensity of tissue, the brighter the color the less the intensity.
 Tissue Velocity Doppler Imaging (TVD): This imaging mode provides direction and speed
information of the tissue quantificationally with doppler spectrum.
 Tissue Velocity M Imaging (TVM): This function assists to observe the cardiac motion
through a direct angle. TVM mode is also called Color Tissue M mode, refer to "5.10 Color
M Mode" for details.
 Only phased probe is valid for TDI function.
5.9.1 TDI Exam Protocol
 In real-time mode, tap [TDI] on the right side of the operating panel to enter the corresponding
TDI mode as follows:
 In B or B+Color mode, tap to enter TVI mode.
 In Power mode, tap to enter TEI mode.
 In PW mode, tap to enter TVD sampling line adjustment status.
 In M mode, tap to enter TVM sampling line adjustment status.
 Switching between the TDI modes
In TDI mode, tap [Color], [Power], [M] or [PW] to switch between the modes.
 Exit TDI
 Tap [TDI] to exit TDI mode and enter general imaging modes.
 Or, tap [B] to return to B mode directly.

Mindray TE7 Specifications

General

Display Size	15 inch
Imaging Modes	B-Mode, M-Mode, Color Doppler, Power Doppler, Pulsed Wave Doppler, Tissue Doppler
Connectivity	USB, HDMI, DICOM, Wi-Fi
Probe Connectors	3
Image Storage	External USB storage