Setup 12-1
12 Setup
The Setup function is designed to set the configuration parameters of operating the system and
maintaining user workflow setup data. The setup data of the user and system are stored o the hard
drive, and should be backed up to CD/DVD or USB memory device.
When the preset data is changed, be sure to save the preset data
according to the methods described in this chapter. Mindray is not
responsible for the loss of preset data.
To enter Setup: Tap in the top-right corner of the screen and select to enter the
setup menu.
To exit Setup:
Select [Save] in the Setup menu. The parameter settings are saved.
Select [Cancel] in the Setup menu to close the Setup menu.
If you change the system language and tap [Save] in the Setup menu, the system
automatically shuts down to make the modification effective.
Tip: configuration parameters may not be all fit on one screen view, swipe downwards to see more
options.
To Next Page
Loading...
Need help?
General
