2-2
2.2 Connectors for Peripheral Devices
1. Connector for Temp probe
2. Network connector: It is a standard RJ45 connector used to communicate with external
devices, such as central monitoring system, e-Gateway, or used to export data or
upgrade the system.
3. Multi-function connector: connects to the hospital's nurse call system, or connects
external devices through DIAP protocol.
4. USB connector: connects to barcode scanner or USB disk.
5. AC Power Input
6. Equipotential grounding terminal: When the equipment and other devices are to be
used together, their equipotential grounding terminals should be connected together
to eliminate the potential difference between them.
2.3 Main Unit
The main unit of the vital signs monitor consists of three parts:
Front housing assembly: main board, Wi-Fi module, keypad board assembly (knob),
display, touchscreen, and alarm lamp board.
Rear housing assembly: power module (AC/DC), power management and interface
board (including SpO
2
isolation power), recorder, speaker, battery, NIBP module, and
SpO
2
board (including three types of configuration, i.e. Mindray, Masimo, and Nellcor).
External module: SmarTemp
TM
module or Infrared Ear Thermometer module. The two
modules are mutually exclusive.
1
2
3
4
5
6
To Next Page
Loading...
