Mindray VS-900 - Disassembling Pumps and Valves (NIBP Optional); Disassembling AC;DC Power Board and Battery Converter Board

6-13
6.3.13 Disassembling Pumps and Valves (NIBP optional)
1. Cut the two cable ties and take out the gas pump.
2. Unscrew the three M3×6 screws as indicated and take out the valve.
6.3.14 Disassembling AC/DC Power Board and Battery Converter Board
1. Unscrew the four M3×6 screws as indicated and take out the AC/DC power board.
Cable tie
3 M3 screws
4 M3 screws