3-3
CAUTION
Use mounting brackets we supply or approve. If other compatible mounting bracket
is used, be sure it can be safely used on the vital signs monitor.
The mounting bracket should be installed by our qualified service personnel, or
engineers who have adequate knowledge on it.
If other mounting solution is used, the installation personnel and the customer
should verify if it can be safely used on the equipment, and the customer assume
the responsibility for any risk resulting from that.
3.3.1 Preparation for Power on
1. Before you start to make measurements, check the equipment for any mechanical
damage and make sure that all external cables, plug-ins and accessories are properly
connected.
2. Plug the power cord into the AC power source. If you run the equipment on battery
power, ensure that the battery is sufficiently charged.
3. Press the Power ON/Off button (
) on the front panel to turn on the equipment.
To Next Page
Loading...
