4-51
3. Record the configuration the user wants to activate.
4. Return the above recorded information to the Service Department to apply for the
corresponding activation code.
4.4.2.2 How to Activate Software Function
NOTE
z Before activation, check and record the user’s existing paid configurations and also
the paid configurations to be added.
z After entering the activation code, make sure that the entered activation code is
same to that provided by the factory.
To activate software functions:
1 Select the [Maintenance] shortcut key → [Factory Maintenance >>] → enter the
required password → [Function Configuration >>] → [Activate Functions >>] to
open the [Activate Functions] menu as shown below.
2. Enter the required activation code.
To Next Page
Loading...
