6-28
The following picture shows the appearance of power board.
WARNING
z Before replacing the power board, be sure to turn off the system switch and
unplug the power cord to prevent electric shock.
6.2.25 Replace the Fuse
1. Screw out the fuse by using the flathead screwdriver as per the direction marked on the
fuse holder.
2. Insert a new fuse and tighten the fuse cover by using the flathead screwdriver.
WARNING
z Before replacing the fuse, be sure to turn off the system switch and unplug the
power cord to prevent electric shock.
To Next Page
Loading...
