5-15
5.3.1.1 Precautions for Use of Circuit Adapter Test Fixture
There are four connectors for pressure sampling lines and four ∅6 quick plug-in connectors
with number marked on the circuit adapter test fixture, as shown below.
The connectors for pressure sampling lines can be connected with Φ6 silicone tubes and
the ∅6 quick plug-in connectors with PU tube (6X100), PU tube (6X200) and PU tube
(6X300), as shown below.
∅6 quick plug-in
connecto
∅6 quick plug-in
connector
Connector for
pressure sampling
line
To Next Page
Loading...
