Need help?Do you have a question about the Minebea Intec PR 5220/06 and is the answer not in the manual?
General| Brand | Minebea Intec |
|---|---|
| Model | PR 5220/06 |
| Category | Transmitter |
| Language | English |
Guides on connecting analog load cells and platforms to the device.
Details the functions of the 'EasyFill' application for single-component filling.
Outlines the structure and options within the 'EasyFill' application's start menu.
Steps for automatically finding and connecting the device within a network.
Instructions for connecting the device to a notebook or PC via a point-to-point connection.
Guidance on operating the device remotely using Virtual Network Computing (VNC).
Instructions for operating the device directly via a web browser.
Covers the configuration of various system parameters, including serial ports and network settings.
Details on configuring and managing weighing points for different scale types.
Step-by-step guide for calibrating the device's internal weighing point.
Explains how to select and perform different calibration modes.
Procedure for defining the maximum load value for calibration.
Steps for determining and setting the dead load value for accurate measurement.
Guide to calibrating the scale using load cell data without physical weights.
Instructions for optimizing the measurement range by setting linearization points.
Procedures for calibrating the device when connected to an xBPI scale.
Details on parameter tables for xBPI scale configuration.
Steps for calibrating Pendeo® type digital load cells.
Procedure for searching and identifying connected load cells.
Detailed steps for calibrating individual load cells.
Guide to performing software-based corner correction for scale calibration.
Instructions on how to properly terminate and save calibration data.
Covers general parameter settings not related to weighing electronics.
Steps for selecting and configuring various serial interface protocols.
Configuration of parameters for different fieldbus interfaces.
Defines network parameters for network connections, including IP address.
Instructions for setting and configuring limit values for scale outputs.
To Next Page
