D
Darren FloresAug 19, 2025
Why does my Minolta Copier say 'Please add toner'?
- KKenneth ValenciaAug 19, 2025
The 'Please add toner' message appears because the toner has run out. Replace the toner bottle to resolve this issue.
To Next PageTo Next PageWhy does my Minolta Copier say 'Please add toner'?
The 'Please add toner' message appears because the toner has run out. Replace the toner bottle to resolve this issue.
What to do if the message 'Please Replace the toner bottle' appears on my Minolta Copier?
If the message 'Please Replace the toner bottle' appears on the display of your Minolta Copier, you should replace the toner bottle.
How to resolve 'Image data has caused memory overflow' on Minolta Copier?
The message 'Image data has caused memory overflow' on your Minolta Copier indicates that the memory capacity is insufficient. Try creating the copy with different settings. If the message appears frequently, consider increasing the memory capacity.
How to fix a dirty edge on a Minolta Copier copy?
A dirty edge on a copy from your Minolta Copier can be caused by several factors: * The Original Pad may be dirty, in which case you should clean it. * The original may not be placed in the correct position; ensure it is placed correctly on the original glass. * The copy paper size may be larger than the original; select the same copy paper size as the original. * The zoom factor selected may not be correct for the copy paper size; select a suitable zoom factor for the copy paper size.
What causes bad alignment on Minolta Copier copies?
Bad alignment in copies from your Minolta Copier can occur due to several reasons: * The original is not placed correctly on the original glass. Make sure it is positioned correctly. * The original is not placed correctly in the document feeder. Ensure correct placement. * The original is unsuitable for the document feeder. In this case, place the original on the original glass instead. * The original glass is dirty, especially when using the automatic document feeder. Clean the original glass.
Why is the image uneven on my Minolta Copier?
An uneven image on your Minolta Copier can result from: * A dirty original glass surface. Clean the original glass. * A dirty original pad or document transport belt. Clean these components. * A very thin or highly transparent original. Place a blank sheet of paper over the original. * A 2-sided original. Manually set the exposure to a lighter level.
What to do when Minolta Copier says 'Stapler is empty'?
When your Minolta Copier displays 'Stapler is empty', it means the staples have run out. Replace the staple cartridge to continue using the stapler function.
What does 'Return the following # of originals to document feeder' mean on Minolta Copier?
The message 'Return the following # of originals to document feeder' on your Minolta Copier indicates that the displayed number of originals could not be processed. Place the indicated number of originals back in the automatic document feeder.
What to do if the Minolta Copier exposure is manually set too light?
If the exposure level has been manually set too light on your Minolta Copier, manually set the exposure to a darker level.
What does it mean when my Minolta Copier says 'This mode cannot be selected with the OOO mode'?
The message 'This mode cannot be selected with the OOO mode' on your Minolta Copier means that certain modes cannot be combined. Cancel one of the two functions to proceed.
General
