7
Troubleshooting
7-44 Di251/Di351
7.7 These Functions Cannot Be Combined!
The following table shows the explanations of the function combinations.
The following symbols are used:
# Combination allowed.
O Combination allowed. The function that was activated first has priority.
× Combination not allowed. The function that was activated last has
priority.
Ö Simultaneous function enabling allowed. The function that was
activated first has priority.
A Simultaneous function enabling allowed. The function that was
activated last has priority.
A Combination not allowed in conjunction with the single document
feeder. The function enabled first will be disabled automatically if a
sheet of copy paper is loaded onto the single feed tray.
BThe“Sort“ feature is enabled automatically.
C Combination only allowed in copy mode 1>2. The function that was
activated first has priority.
D Combination not allowed in conjunction with the automatic document
feeder. The function that was activated first has priority.
E Combination not allowed in conjunction with the automatic document
feeder. The function that was activated last has priority.
F The copier automatically selects a standard zoom factor for the “ 2in1
Separation“, “2in1“, “4in1“ and “Book Original“ functions.
G Combination only allowed with the FN-109 finisher. If the finisher
FN-504 is installed, the first function activated has priority.
H Combination only allowed with the FN-109 finisher. If the finisher
FN-504 is installed and single feeding mode is selected, an error
message is displayed on the touch screen. The function that was
activated first is disabled.
– No effect.
To Next Page
Loading...
