Minolta Di251 - Processing Originals Using the Duplexing Document Feeder

3
Initial Steps . . .
3-10 Di251/Di351
Processing Originals using the Duplexing Document Feeder
Feed originals with the duplexing document feeder.
1
Set the document guide to the size
of the original.
2
Place up to 50 originals (80g/m
2
)in
the automatic document feeder.
Thesidethatistobecopiedmust
be up.
?
Do you have toload theoriginals
differently than illustrated here?
Ü Define the original document
alignment. For more
information, see page 4-47.
3
Ensure that the stack of originals
does not exceed the maximum fill
height (see Ä mark on the
document feeder)
4
Push the originals flush up against the feed chamber.
5
Start the copy cycle.
The originals are pulled in starting with the top sheet.
Note the following important information!
Suitable originals for the duplexing document feeder are:
Type of originals: • Single sheets of smooth standard paper
• Single feed 40.1 to 81.4 g/m
2
• 1-sided originals 50 to 110 g/m
2
• 2-sided originals 60 to 90 g/m
2
• with Mixed Original Detection 60 to 90 g/m
2
Original size: • 1/2-sided originals A3L to A5L
• with Mixed Original Detection A3L to A4
P
P