6
Utility
6-28 Di251/Di351
Adding Toner
If you make a large number of very dark copies, the increased toner
consumption may cause subsequent copies to be made too light. If this
occurs, start the toner replenisher function. This will ensure even copy
quality.
1
Press the [UTILITY] button on the
control panel.
The display will change.
2
Press the [USER MANAGEMENT]
key.
The display will change.
3
Pressthe[TONER REPLENISHER]
key.
The toner replenishing process is
carried out.
m Do not switch the copier off
while this is happening.
m Never open any copier doors
while this is occurring.
The process will end automatically.
4
Make any other desired changes to
the user management settings.
To Next Page
Loading...
