6
Utility
6-26 Di251/Di351
Alarm Beep
Set the volume of the alarm beep.
1
Press the [UTILITY] button on the
control panel.
The display will change.
2
Press the [USER MANAGEMENT]
key.
The display will change.
3
Press the [ALARM VOLUME] key.
The display will change.
4
Use the arrow keys to adjust the
volume of the alarm.
The default setting is "3".
5
Confirm your settings with
[ENTER].
The display will change.
6
Make any other desired changes to
the user management settings.
To Next Page
Loading...
