Minolta Di251 - Starting the Copy Cycle; Interrupting the Copy Cycle

3
Initial Steps . . .
3-6 Di251/Di351
3.5 Starting the Copy Cycle
Start a copy cycle.
Ü Press [START].
The copy cycle starts.
3.6 Interrupting the Copy Cycle
Interrupt a time-consuming copy cycle to create a different copy set.
1
Touch the [INTERRUPT] key on the
control panel.
The current copy cycle is
interrupted. The [INTERRUPT] key
on the control panel lights up. The
copier is in interrupt mode.
2
Make the settings for the different
copy cycle.
3
Press [START] to start the printout of the different copy cycle.
The copies are printed.
4
Once the interim copy cycle has finished, touch [INTERRUPT].
The interrupted copy cycle can be continued.
.
Not all functions are available!
When you are working in interrupt mode, not all functions are
available. For more information, see page 7-54.