Customizing Your Copy
4
Di251/Di351 4-25
Saving Proportional Zoom Factors
Store up to two frequently used proportional zoom factors to be able to
access them quickly at any time.
1
Touch the Basics menu key [Zoom].
The zoom settings are shown.
2
Press the [CUSTOM ZOOM] key.
The display will change.
3
Press the [MEMORIZE ZOOM
RATIO] key.
The display will change.
4
Press the
[C] key on the control panel to
delete an old zoom factor that you
no longer need.
Note the following important information!
The zoom factor can be changed in 0.001 increments.
Zoom range: × 0.250 to × 4.000
To Next Page
Loading...
